Actionable Steps to Setup Your Stanley 49477 and 1097 Remotes

Remotes for the garage door openers are necessary today. As home automation is becoming a common thing, a homeowner cannot go without a garage door opener remote.

A single home might need one or more remotes depending on the number of cars and the people driving. This gives everyone access to the home and also adds security.

The Stanley 49477 and 1097

If you have Stanley garage door openers, the best remotes to match are those from Stanley as well. The Stanley 49477 and the 1097 are multiple-button remotes that work with your Stanley garage door openers.

The 49477 is a secure remote with three buttons. It is a mini keychain remote that does not use any dip switches to program and set. The 1097, on the other hand, is a four-button remote with binary switch coding. It is only compatible with Stanley openers that has 310MHz frequency.

How to Setup Your Stanley 49477 Remote

The Stanley 49477 is compatible with all Stanley garage door openers. Its one-touch programming makes it a really easy to setup.

In programming this multi-functional remote, you need to locate and press the remote button found on your garage door opener. This usually has the R letter printed on the button. The LED light found on top of the button will come on. This indicates that the power unit is on and is now on learning mode. Other models might have the learn buttons instead of the remote button.

After this, press your preferred button on your remote. The lights on the opener will blink twice and go off. Press the same button on your remote to activate the garage door opener. This completes the programming process.

Remember to test your remote after you finish programming. This ensures that you have done it properly. If you have another remote, you need to program it again with the garage door opener.

How to Setup Your Stanley 1097 Remote

This remote comes with a visor clip that you can keep in your car. The Stanley 1097 uses the 10-position dip switch format that provides 512 possible codes for every channel. It will only activate if the receiver is set with the same code as the opener. This remote is only compatible with Stanley garage door openers with the 310 MHz frequency.

In programming the 1097 remote, access the code switch which you can find in the remote. The entire lower half of the remote can be accessed by inserting a small coin in the slot. Once it is removed, you can find the code switches and the battery compartment inside the remote.

After this, you can already set your codes to match with your Stanley garage door opener. Make sure you do this before using your remote to prevent it from interfering with the neighbor’s systems and to provide security to your home.

Set the receiver code to match your transmitter. Since the Stanley 1097 has 10 positions, match the 1-8 switch positions on your Side A code switches with the transmitter. On the 9th switch position, set both the remote and the transmitter into the closed position and the 10th switch into open position. This will work on your first remote.

If you have a second or additional remotes to program, you may need to set them differently from the first one. On the second remote, follow the 1-9 switch positions on your transmitter on the remote’s Side A code switches. Set the 10th switch on the remote to the closed position. For your third remote, set the Side B switch positions to match the 1-8 switches on the remote. Set the 9th and 10th switches to the open position still for the Side B switches.

The post Actionable Steps to Setup Your Stanley 49477 and 1097 Remotes appeared first on By: AClickAwayRemotes.com.

source http://blog.aclickawayremotes.com/stanley-49477-and-1097-remotes

Grizzly G0513ANV Review: A Factory Grade Powerhouse?

The Grizzly G0513ANV is a bandsaw that takes up a lot of space, delivers a lot of power and that can generally up your game when it comes to cutting things.As woodworkers, we love cutting things, and so any tool that promises to cut things faster, more effectively or more deeply is always going to be a winner. The Grizzly GO513AN is just such a tool, offering the kind of power and performance that you would demand as a professional working in full time production.

Unfortunately, the price also reflects that somewhat – at $925 this is pretty cutting too! Even for a professional, that’s a serious investment and when you’re spending that amount of cash it’s highly important that you ensure you’re getting a tool that is up to task.

In this review, we’ll be assessing the Grizzly GO513ANV to see if that is the case…

A Heavenly Tool for Experts

The Grizzly GO513ANV is a hefty looking piece of equipment but is also clearly well made with great production values. Right away, you will feel as though you are getting your money’s worth at least in terms of the size and weight of the thing. That weight is pretty good for keeping the unit stable too while you’re working, so you don’t need to worry about it rocking and wobbling around like some other bandsaws are prone to doing. The colorscheme is black and orange which looks nice enough and should blend into most workshops nicely.

There’s a big stable surface for working on here, which should help to make your work considerably easier and give you the easy ability to move pieces around underneath. It’s made from cast iron, so there’s no flimsy plastic to be found. This feels very solid too so you won’t feel considered leaning your weight on it. The blade is also impressive at 17-inch, allowing you to cut nice and deep through very thick woods. With 12 foot cutting capacity and a 16-1/4 inch throat, this will make mincemeat out of most jobs that you task it with.

And on that front, of course it is the 2HP motor that is the real star of the show. This will power through wood and a lot of other materials and in our review period with the tool we found that extra power to be really rather impressive and very useful indeed. The tool has an ISO 9001 factory designation, so you know it can perform.
It’s not all about power though! Fortunately, the Grizzly GO513ANV also delivers in several other regards and has a lot of extra features. There’s the deluxe fence for guiding straight cuts for instance, the micro-adjusting geared table for getting everything aligned just perfectly and the miter gauge. All this makes it very easy to set up the tool just as you want it and to make precise cuts.

There are also two dust ports as well as an easy quick-change mechanism for the blade. You get two blade speeds (1700 and 35000) and a fair bit more as well. In short, this comes with the full roster of features.

Pros and Cons

While this might seem like a lot of money if you aren’t used to buying factory grade equipment, it’s actually very good value for what you’re getting. This is an incredibly powerful, versatile and feature-rich tool and one that will be capable of handling pretty much any task you can dream up.Of course nothing is perfect. While there aren’t too many complaints here, the included saw could have been a little bit better. Likewise, you might need to make some of your own readjustments to get it to perform optimally out the box.

Conclusion

In conclusion, the Grizzly GO513ANV is one of the best value propositions out there if you are looking for a factory-grade bandsaw. It has all the power, functionality and performance that you could expect for the price, it’s very well made, very solid and all-in-all just a fantastic product that won’t see you wrong!

So what do you think about the Grizzly GO513ANV? Will you be adding it to your own arsenal? Let us know in the comments below!

source http://www.toolerant.com/grizzly-g0513anv-review-a-factory-grade-powerhouse/

source http://toolerant.blogspot.com/2017/02/grizzly-g0513anv-review-factory-grade.html

Grizzly G0555LX Bandsaw Review: Cheap & Good ?

A good bandsaw can make all the difference to any workshop by giving you the means to make precise cuts through a wide range of materials and to the extent that you are able to cut precise shapes and even intricate patterns. Bandsaws are also particularly easy to use as they have their own base and their own plate for working on. This means you can simply take your piece of material over to them and start cutting; there’s no need to clear space where you’re working or to struggle trying to manually saw without knocking things over with your elbow.

Adding a bandsaw to your repertoire is definitely a good call if you are a DIYer or woodworker then, but the question is how you go about choosing the right one. There are a lot of different options here and they can range quite drastically in terms of their power and their versatility. Some will take up a good half of your workshop and have their own stand. Others are small and can be added to any existing table top. Knowing the kind you need and getting the right one is key if you want to avoid wasting money while ensuring that you are able to tackle every task that you need to.

Read on to find out if the Grizzly G0555LX is the bandsaw you’re looking for.

All about the cutting Depth…

The Grizzly G0555LX uses a cast iron frame with a precision ground cast iron table. That should tell you right away that this is a powerful tool with some serious build quality going on. Cast iron tables make a big difference over plastic alternatives, as they allow you to put some real pressure on the table without worrying about it bending, warping or wobbling. Likewise, the weight of the bandsaw itself is also ideal for putting some pressure on and still feeling like the thing is stable enough to allow for perfect precision. This is a big machine too, with a floor to table height of 43”.

The saw itself is 14 inch, which gives some great cutting depth. The maximum cutting height is 6”, while the throat is 13-1/2”.

The Grizzly G0555LX is CSA C22 certified, so you know you’re getting a good quality product that could potentially be used in a professional setting. Of course, for the relatively low price though, you know that you’re not going to get the very highest power. This is a 1HP motor, which is certainly better than a lot of hobby-grade bandsaws but at the very lower end of what you might consider using professionally. It’s still a good value proposition in terms of pure power-to-cost ratio though and for that reason alone it is worthy of praise. It has two speed settings, which are 1800 and 3100 RPM.

Numbers can only tell you so much, but we can report happily that this is a great tool to use that really glides through most things you throw at it. It feels sturdy and stable and for the money, you really couldn’t ask for more.

Pros and Cons

The advantages of this device largely revolve around its relatively low price compared with the power that you are getting. This is a great performer and it will impress time after time. It is heavy, weighty and powerful and comes with all the extra features you’d expect like the dust port, fence and miter gauge.

The only drawback for some will be that this is a 1HP and not a 2HP. It’s perfectly understandable for the price but the question you might ask is whether it’s spending just a little bit more in order to get something that does offer that slight upgrade in power.

The other thing to be aware of is that it does not come with the stand, despite it being shown in many of the pictures.

Conclusion

All in all, this is a fantastic bandsaw that really delivers in terms of the power, the build quality and the weighty construction. It has plenty of features and in short, does everything that you could hope it to for a relatively low price. This will be more than enough for hobbyists and ample for most professionals too!

source http://www.toolerant.com/grizzly-g0555lx-bandsaw-review-cheap-good/

source http://toolerant.blogspot.com/2017/02/grizzly-g0555lx-bandsaw-review-cheap.html

Delta 28-400 Band Saw Review: Does it have all the features you need?

The Delta 28-400 is a bandsaw that takes up a lot of space and that can handle professional tasks for any advanced hobbyist or small professional service. Bandsaws are tools that hold a saw taut between two large wheels and drive it with a powerful motor. This then allows you to move a piece of wood (or sheet metal in some cases) around underneath in order to make straight cuts – or even shaped or patterned cuts.

This is one of the easiest ways to cut through wood and the fact that most bandsaws come with their own, large table for resting the material on only makes life easier for you. This is a brilliant addition to any workshop for all those reasons. Let’s take a look at whether the Delta 28-400 is the right choice for your own workflow…

A heavy Duter Miracle Worker or a complete dud ?

This is a large machine that comes with a heavy duty steel frame and an aluminium trunnion table support. It is made in an industrial looking silver/grey and has the kind of heft and sturdiness that we like to see from more expensive tools. Of course, this does have quite a large footprint, so if you’re going to be slipping it into your home office then it may pay to take some measurements first to make certain that it is going to fit in nicely!

Size wise this also has some benefits. It’s very heavy, which ensures that it’s not going to wobble and rock while you use it. That cast iron table also benefits from being ‘oversized’ at 15 ¾ inch by 18 7/8 inch. This gives you plenty of room for moving things around and getting the right angle and it’s a very welcome inclusion. That table also tilts up to 45 degrees, meaning you can use it to make bevelled cuts. And to further mimic the benefits of a compound miter saw you also get a positive stop so that you can quickly find the right angle.

What really matters though is the way that a bandsaw cuts and this gives you plenty of power thanks to its 14inch saw and its 1HP motor. That’s enough to cut through thick wood with ease, as well as non-ferrous metals. There’s a two-speed pulley, which is an important feature on any bandsaw if you intend on cutting through metal (faster saws do not work with sheet metal). Of course 1HP isn’t quite as powerful as 2HP and for some people that’s going to be a downside. But it is still plenty powerful and will be more than most hobbyists need and enough for a lot of professionals too.

Pros and Cons

The advantages of the Delta 28-400 revolve around its stable construction, it’s good cost-to-power ratio and the fact that it’s a 1HP motor driving a 14” saw – which is more than enough for the vast majority of tasks. This is a large, powerful machine that is going to give you a lot of scope when it comes to cutting through things.

In terms of the build quality though, the blade does rattle a little which is slightly disappointing when everything else is so strong and durable feeling. Likewise, it’s a bit of a shame that it doesn’t come with a fence. You can fit this yourself of course, but it’s something that you would get with a lot of other devices included. And speaking of value, it is also not quite as affordable as some other 14” bandsaws with 1HP.

As long as these issues aren’t deal breakers for you though, then you’re going to find that this is a well-made and very capable bandsaw and one that makes a big difference to your cutting capabilities.

Conclusion

Overall, this is a good choice for anyone that is looking for a bandsaw capable of handling all but the very most challenging cuts. It’s obviously less powerful than a 2HP with a 17” blade but it’s going to be more than enough for most people and certainly for hobbyists. It’s good value for money even if it lacks a couple of features.
So, what do you think? Will you be picking up the Delta 28-400? Let us know in the comments below or feel free to check our many other reviews for more bandsaw options!

source http://www.toolerant.com/delta-28-400-band-saw-review-does-it-have-all-the-features-you-need/

source http://toolerant.blogspot.com/2017/02/delta-28-400-band-saw-review-does-it.html

Read this Review to find out why the WEN 3975 is a unique band saw !

There are several tools that every woodworker or DIYer should have in their collection. Most will want a router for instance, you’ll probably have a jigsaw and you’ll likely find that a bandsaw comes in handy occasionally too. But then there are those other tools that perform specific jobs. These are a little more exciting in some ways because they provide you with something unique and they help to make your workshop stand out from the crowd.

The WEN 3975 is just such a novel example of a tool. This is a benchtop bandsaw, meaning that it holds a saw taught between two wheels and that it can be used to make detailed cuts. What is a little different though is that it is aimed at cutting metal and is only 5”. If you’re someone who cuts a lot of metal then, you might well find that this is a useful tool to add to your collection. But is it well made? Who is it for? What are the specifications like? We’ve reviewed the product so that you can decide if it might be right for you…

Product Description

The WEN 3975 doesn’t look a whole lot like a traditional bandsaw. It has a much more horizontal design and looks a bit more like a pivoting orange ring attached to a black metal base. It’s well made though and the orange and black colorscheme (typical of WEN) gives it a nice, professional finish.
The WEN 3975 looks different because it is different. The smaller wheels are useful here because cutting through sheet metal of course requires slower cutting speeds. But the WEN 3975 gives you plenty of option so you can rest assured that you’ll be just fine cutting through woods and other materials as well. Specifically, the WEN 3975 can cut at anything from 125 to 260 feet per minute. That adjustability is very important here, because it gives you the option to tailor the speed for the precise metal that you are going to be cutting.
The pivoting nature of the main body of the unit is also important as it allows for bevelling meaning that you can make a range of angled cuts. This lets you cut anywhere from 0 to 60 degrees. The WEN 3975 can be used to cut pipes up to 5” in diameter or can cut rectangular materials as large as 5 x 4-7/8. That is surprisingly thick for a 5” bandsaw and especially when you consider that this device is so compact for easy storage. Numbers can only tell you so much though. What’s more useful is to know what a device actually feels like to use. And in that regard, we are happy to say that during our review we found it very easy to cut through brass, aluminium, copper, steel and a range of other metals. The light weight and portability is a really nice additional benefit and the 4.5amp motor is more powerful than you probably expect it to.
There’s also a two year warranty and a lot of very positive reviews from other users.

Pros and Cons

There is very little bad to say about this bandsaw. The only downside is that this is not going to replace your tabletop bandsaw or even a regular handheld. Rather, this is a specific tool for a specific job and as long as you are aiming to cut through metal, you are going to find that this is an excellent addition to your repertoire.

The positives then are that this device cuts so easily through metal, that it is so portable and that it is so well-made and comes with the guarantee from WEN. It’s a great addition to your workshop.

Conclusion

To conclude, the WEN 3975 is perfect for anyone who needs to cut through metal regularly. It’s a bit of a niche product but if you happen to need that niche, then you’re going to be very happy with this excellent tool. We can highly recommend this tool and think it will come in handy in many different scenarios.
So, will you be adding this to your own workshop? Let us know in the comments below and feel free to let us know if we missed anything!

source http://www.toolerant.com/read-this-review-to-find-out-why-the-wen-3975-is-a-unique-band-saw/

source http://toolerant.blogspot.com/2017/02/read-this-review-to-find-out-why-wen.html

Should i buy the WEN 3962 bandsaw? Read this Review!

When reviewing tools, I like to think of them in terms of possibilities. Sometimes a tool is simply there to make life a little bit easier: it helps you to perform jobs more quickly and easily and thereby takes away a little stress and brings some more joy to the act of building furniture and other wooden items. But other times, a tool actually increases the number of things you are capable of doing. Sometimes, a tool will present you with exciting new opportunities and allow you to make stunning items that you never could have made before. Perhaps that means you can make something more intricately decorated, or maybe it means you can work with materials that were otherwise off-limits.
And this is the case with the WEN 3962. This is a bandsaw that gives you a decent amount of power and lets you slice through different materials. It comes with its own stand and takes up a lot of space in your workshop, making it a definite ‘presence’. And when you look at it, you just know you’re going to be able to do all kinds of things that you couldn’t before.
But does it really open a world of possibilities? Or is it disappointingly limited?

Product Description

There is always something nice about getting a tool with its own stand. It makes a big impact to the layout of your workshop and means that you can work with it much more quickly and easily – without having to move all the bits of wood and piles of sawdust out the way first.This is an imposing figure with four legs and a large, powerful looking bandsaw sitting on top. It provides a generous amount of space too, with a 14-1/8 x 12-1/2 inch work table that can bevel to 45 degrees for making bevelled cuts or finding a more comfortable angle. The design is sleek and black and the whole thing has a certain heft that makes it feel good quality as soon as you start using it.This bandsaw takes 72 inch blades and powers them with an impressive 3.5 amp motor. This gives you some real cutting power and is capable of going six inches deep and 9-3/4 inch wide. The two available speeds are 1520 and 2620.

Also in the package are a dust pot, a fence for making straight cuts and a miter gauge.

Pros and Cons

When you read the official description from the manufacturer, the phrase that sticks out is:
“Remember when tools were actually powerful?”
It’s true: you certainly can’t fault this thing in terms of its power and the power-to-cost ratio is very good indeed. If you’ve been looking for something that will make it possible to make precise and detailed cuts through tough materials, then the WEN 3962 might just be the tool you’re looking for.The tool is also well made and the extras are welcome too.On the downside though, this thing can be a real nightmare to adjust. Having read other review, we were ready for this but we still found that it could be very hard to find the perfect angle and making adjustments was tedious. Installing new blades is likewise a fiddle and a struggle.
This is a real shame as the tool is otherwise a fantastic value proposition for someone who yet doesn’t have a bandsaw. The problem is that if you are relatively new to woodwork and DIY, then you are likely to find that this is a bit of a challenge to use and that means we can’t recommend it to absolute beginners. This is a very good bandsaw but only if you’re willing to put in the time and effort.

Conclusion

Overall then, the WEN 3962 is a great bandsaw with spectacular power-to-price ratio. It is well made and has lots of settings and features. The downside is that it can be a fiddle to use and adjust and this can take some of the joy out of using it – not to mention potentially leading to imperfect cuts. If you’re willing to work with it and you’re confident in your ability though, then it is highly recommended.

source http://www.toolerant.com/should-i-buy-the-wen-3962-bandsaw-read-this-review/

source http://toolerant.blogspot.com/2017/02/should-i-buy-wen-3962-bandsaw-read-this.html

Actionable Steps to Setup Your LiftMaster 894LT and LiftMaster 895MAX Remotes

Your garage door remote is important to your daily home activities. Being able to control your garage door every time you leave and arrive home is already a must in today’s modern time. It is no longer a luxury but a necessity in everyday life.

Replacing your Remote

If you’re looking into finding a replacement remote for your LiftMaster garage door opener, you need to check the color of the learn button. This can be found inside the motor of your garage door opener.

Two of the bestselling remotes from LiftMaster are the 894LT and the 895MAX. The LiftMaster 894LT is compatible with the other remotes with purple learn buttons manufactured from 2006 to 2013. It is also compatible with remotes made from 1997 to 2005 with orange or amber-colored buttons and remotes from 1993 to 1997 with green learn buttons.

The LiftMaster 895MAX, on the other hand, works with garage door openers from 1993 to the present with blue learn button. It’s a universal remote that works with LiftMaster, Chamberlain, and Sears garage door openers. This LiftMaster remote is already discontinued. However, there are still some stores that carry this remote control.

Steps in Installing Your LiftMaster 894LT

In programming this garage door opener, locate the learn button on your garage door opener. You might need to open the lens cover in order to find the button. This can be found near the antenna and the LED light. Other times, this can be found exposed on the garage door opener.

Open the access door on your remote control which lets you get to the AAA battery and the access switch. Push down the access switch until the red LED lights up and stays on. Once that’s on, you go to your garage door opener and press and hold the learn button until the LED light on the motor turns on. Afterwards, choose which button on your remote you want to program and push that button. The light on the remote will blink and wait for the garage door opener to respond. Keep pushing that same button until the LED light on the remote goes solid. If the light on the garage door opener turns on, push the program button to lock it in.

The great thing about this LiftMaster remote is that it can be used to replace the garage door openers with dip switches. To do so, just press and hold the program button on the remote and press and hold the learn button on the opener. The LED light on the remote will blink and press the button on the remote that you want to program. The LED light will go steady and you need to press again the program button on the remote to lock it in.

You can then test the garage door remote to ensure that you’ve programmed the remote properly. If your garage door opener does not respond, then you might need to reprogram your remote.

Steps in Installing Your LiftMaster 895MAX

To program your remote, push the learn button on your garage door opener. Then, push the program button on your remote with a pin for the LED lights to come on. Press the button on the remote that you want to program with your garage door opener. By this time, the light starts blinking. Continue pushing that same button until the light on your garage door opener blinks on and off. Press another button on your LiftMaster 895MAX remote to lock the programming in.

You can now test your remote control to ensure that you’ve properly paired your remote with your garage door opener. Reprogram your garage door remote if your opener does not respond.

The post Actionable Steps to Setup Your LiftMaster 894LT and LiftMaster 895MAX Remotes appeared first on By: AClickAwayRemotes.com.

source http://blog.aclickawayremotes.com/liftmaster-894lt-895max-remotes