Top 11 Garage Issues and Solutions

The garage door is one of the most useful devices in the home. It has been making lives of homeowners quite convenient for decades. In addition to that, it has also been upgraded in the recent years to have a full layer of security for the home. It is already becoming an indispensable part of the home.

However, you cannot avoid having problems with your garage door. Although it is sturdy, there will come a time when you’ll have issues due to broken parts or just normal wear and tear of daily use.

Here are the common garage door issues and solutions to help you during those tough times where your garage door won’t work as it should:

1. Door doesn’t close all the way to the floor. This probably is one of the most common garage door issues and solutions. Often, when this happens, the close limit switch may need some adjustment. It may not be adjusted according to your door’s height. If this is not the case, check if the garage door is binding when it has to be lowered or raised manually.

2. Garage door doesn’t open fully. If the garage door opens but stops short halfway it may be caused by the up limit switch or by damaged rollers. If it’s the former, check your switch and adjust it accordingly. The switch is usually a lever found at the end of the track. If it placed too far, the door will stop before completely opening. Adjust it by moving it closer to the motor. If it’s caused by damaged rollers, the only solution is to replace them with new ones.

 

3. Door only closes halfway and then reverses. This is caused by a broken cable, worn-out extension pulley, an improper adjustment of the close limit switch or bent tracks. When you encounter this problem, make sure that you call the professionals for this issue.

4. Motor doesn’t stop running. This can be an unusual problem for starters but can be quickly solved. This happens when you first install your garage door opener and you’ve miscalculated the garage door height. It is often caused by the up-limit switch that’s not placed properly. If your motor won’t stop running, you might have to readjust your up-limit switch and place it farther from the motor.

5. Door opens slowly and awkwardly. This usually happens when the springs are broken or have problems. What you can do is replace the spring with new ones that match your garage door. Although this can be a difficult and dangerous task, it is doable for experienced homeowners. You can also hire a specialist to repair your springs.

6. Garage door reverses after touching the floor. When the door leaps upward right away after it hits the floor, you have an issue with your close limit switch. To solve this problem, adjust the screw on the switch in small increments. Test the door and check. Continue the adjustments until the door stops even when on the floor.

7. Door doesn’t operate with either keypad or remote. When you first encounter this problem, check the power supply on your garage door opener to rule out this cause. This issue can be triggered by different things. Replace the batteries on your remote and check the wiring on the keypad. Ensure that the antenna is not damaged. You might also want to consider reformatting your keypad or remote.

8. Garage door won’t stay open. This is often caused by broken spring system as it is responsible for lifting the garage door. Check your springs found on top of your garage door. If you have a broken spring, you need to replace it right away as this can be a serious issue.

9. Door is uneven. A slanted or uneven garage door is often caused by a broken cable or worn-out spring cable pulley. A quick fix to this problem is to replace the cable or springs with new ones.

10. Garage door won’t open. This issue might be caused by bent tracks or broken springs. Once this happens, you have to replace the broken parts with new ones.

11. Door doesn’t open in winter. If you live in areas that have cold winters, then you might be experiencing this issue quite frequently. There will be times when your garage door won’t open properly during winter. If this is the case, adjust the sensitivity of the opener by looking for a screw on the motor. Refer to your opener’s manual in order to adjust the sensitivity accordingly.When it’s cold, the rollers might get stiff. So, you’ll need to lubricate your rollers.

The post Top 11 Garage Issues and Solutions appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/garage-issues-and-solutions

New Year’s Promo [2018]: Buy Rowe AMI and TouchTunes Jukebox Remotes

It’s New Year time and it’s that time of the year where gift giving can be stressful. This is especially true if you have a lot of friends and family that you need to find gifts for. Make sure that you find useful presents.

If you have family or friends that are into jukeboxes or have jukeboxes at home, then it might be a smart move to gift them with jukebox remotes. Often, these get broken too easily and people replace them too frequently. This is why handing out a remote or two will be a great gift idea.

Where to purchase remotes

The top jukeboxes used today are the Rowe AMI and the TouchTunes jukeboxes. Make sure that these are the brands that your friends or family are using so you ensure that you’ve purchased the right one.
There are different options for buying Rowe AMI and TouchTunes remotes. You can go withthe usual electronic retail stores in your area. However, you have to keep in mind that you have to make it through the holiday rush. Ensure that the remotes you’re looking for are compatible with the jukeboxes that your friends or family owns.
Another place to check out is online listings. Websites such as eBay or Amazon give you a ton of options when it comes to jukebox remotes. There are many online sellers from different parts of the world who are posting their items. When going this route, make sure that you buy from a trusted seller with excellent feedback and good return policies.

New Year Promo for Jukebox Remotes

If you’re on a budget, Press On Products has a New Year promo for their Rowe AMI and TouchTunes remotes. When you buy a 10-remote pack, you can get an extra remote for free.

This promo goes for both Rowe AMI and TouchTunes remotes. So, you don’t have to only give a single remote. You can definitely gift them a few remotes to last them a pretty long while.

The remotes come with a money-back guarantee so you have the assurance with every purchase.

The perks of gifting Rowe AMI and TouchTunes remotes

Jukebox remotes are more useful than you ever thought they would be. For someone who uses jukeboxes quite a lot, the remote can be a convenient accessory to have. Most remotes that come with jukeboxes are flimsy and get broken quite easily. Replacement remotes, such as those from Press On Products, are made to be durable.

With the Rowe AMI A1 jukebox remotes, these come with extra features that owners will find useful. It has three mic options and four channels ready. The volume buttons are paddles and found at the center part of the remote. The overall design is improved. The A1 remotes from Press On Products now has a leash cord for those who want a mounting option so it doesn’t fall and break. Each remote has its leash cord attachment and batteries for immediate use.

The T1 TouchTunes jukebox remotes, on the other hand, are custom-designed by Press On Products. The remote is compatible with all of the TouchTunes jukeboxes. It has extra features with SureGrip plastic molding technology that makes it less likely to be dropped. This is great for those who have coin-operated jukeboxes. This set comes with a free battery cover. In case the remote falls and the battery cover breaks, you now have a replacement battery cover. You no longer have to deal with a duct tape solution for your jukebox remote.

The post New Year’s Promo [2018]: Buy Rowe AMI and TouchTunes Jukebox Remotes appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/buy-rowe-ami-and-touchtunes-jukebox-remotes

Basics and Replacement: Genie Garage Door Carriages

Garage door openers are necessities in today’s busy home. It is difficult to go without a garage door opener, especially if you drive every day. Aside from making home life quite convenient, garage door openers also add a layer of safety and security to your home.

As a home staple, you have a ton of options when it comes to garage door openers. There are different manufacturers to choose from when you’re in the market for a good garage door opener. One of the top garage door openers is the Genie.

Genie as a brand

Genie is one of America’s trusted consumer brands. Originally founded in 1923 by Alliance Manufacturing Company, they produced different industrial, military, and consumer products. It was in 1954 that the company started to manufacture its own garage door opener and named it Genie. It was the first of its kind as it was a radio-controlled and mass-produced garage door opener. In 1958, Genie was an innovative leader in the industry and created the direct screw drive opener. In 1994, Overhead Door Corporation purchased Genie and it solidified the brand as a reliable name for customers.

Genie garage door opener carriages

The carriage assembly travels on the screw-drive rod whenever the garage door is closed or opened. It is also called the shuttle. This links the garage door to the rail. It is the gears that pull the carriage along the garage opener’s rail, which in turn opens or closes the garage door.

• Genie 34107R Excelerator Screw Drive
• Genie 35263R Chain Glide Carriage Upgrade Retrofit Kit
• Genie 36179S carriage screw drive replaces model 20414R
• Genie 36179S carriage screw drive replaces model 20414R
• Genie 36435AS Carriage for ReliaG series
• Genie Belt Drive Carriage Assembly 20462R
• Genie Chain Drive Carriage Assembly 21784R (20438R)

Replacing your Genie carriage

You know it once you have problems with your Genie carriage. If the carriage does not hold the drive or it skips, then it’s time to replace it. You might also want to troubleshoot it. If it’s irreparable, then you might have to go and replace it entirely.

To do so, follow these steps to remove the old carriage:

• Prep your door and your opener. Make sure that you have unplugged your garage door opener and you have properly closed and locked your garage door. This is necessary to make your task faster and safer.
• Pull the emergency release cord. Doing this disengages your garage door opener and makes your door manual.
• Pull the cotter pin out. Using pliers, pull the cotter pin out from the hole on the carriage assembly. Once it’s out, the bar that connects the carriage to the door will fall. So, be careful as it might hit your nose or face. Save the cotter pin.
• Unscrew the bolt. Loosen the screw that holds together the closed limit switch. You need to get the switch out of the way in order to slide out the old carriage. Lift the limit switch and set it aside. Make sure that you mark where the limit switch was originally placed so you won’t have any problem in returning it later on.
• Remove bolts and nuts at the end of the rail. In order to slide out the old carriage out, you need to remove the bolts and nuts found at the tip of the rail. You have to keep the rail in place with a ladder or tie it to a rope so it wouldn’t fall down.
• Slide out the old carriage. Once the pins and bolts are removed, slide out the old carriage.

After this is done, you need to install the new carriage by doing these steps:

• Slide in the new carriage. With the rail hanging, slide in the replacement carriage. Apply some lightweight lubrication on the drive on the carriage. Make sure that it’s facing the right way. Ensure that it passes the limit switch’s original location.
• Insert the rail bolts and screws. Replace the bolts and screws found at the end of the rail.
• Return the limit switch in place. Slip the limit switch back in its original location and replace its screw. Push back the cotter pin in place to secure everything.
• Pull up the emergency cord. Finally, return the emergency release cord back into place.

The post Basics and Replacement: Genie Garage Door Carriages appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/genie-garage-door-carriages

WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer Review

Nail guns exist in a very crowded market and there’s pretty much a nail gun to suit every single scenario. At the end of the day though, most hobbyists and home-improvement enthusiasts will want to choose just one nail gun and that means they’re going to want something that easy to operate and that is versatile.

Is the WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer the nail gun that you’re looking for? It’s certainly a very affordable option, very light and convenient and not too hard on the eyes. We spent some time testing the product for the review and here’s what we found…

Product Description: Super Light and Breezy

One of the most important things when looking for a nail gun is the lightness and the ergonomic. Many applications will involve using these tools for long periods, whether you’re looking at roofing or you’re building your own furniture. That means you need something that you can use for long stretches without getting exhausted.

The good news is that the WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer is a small, light and colourful device that you’ll be happy to use for extended periods. The color is a nice bright blue and yellow which we enjoy but it’s actually surprisingly powerful accounting for its small size.

This is pneumatic tool, which means you’re going to need an air compressor to run it. The good news is that these can be found very cheaply these days and you can get some very small ones too. Air compressors last a long time and will be useful for a range of applications, so it’s a worthy addition to your tool set.

This is still entry level though and won’t be incredibly powerful. Still though, the WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer should be suitable for fireing 18-gauge brads.

It also has a good capacity with a 100-brad capacity. In our tests it performed very well with only the occasional jam. The good news is that a quick-release magazine provides you with easy access to the head, which means you can unjam your jams. You also get a depth adjustment feature, soft nose (to avoid damaging the material you’re nailing) and a carry case.

Pros and Cons: Amazing for the Price

This is an entry level nail gun, make no mistake. It’s not going to be up to the most demanding tasks and if you’re a professional, then you might want something more powerful to ensure that there is no job too big to handle.

But we’ve still a lot of positive to say about this nail gun and in particular, we’re really impressed with just how powerful it is considering the price. The WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer is remarkably cheap. It’s still very well made though, surprisingly powerful and with all the features you could need. The quick release magazine is a particularly well-thought-out addition and wins this model some more brownie points.

Finally, the design is the other pro. It’s so light, so easy to use and so ergonomic that you can happily spend all day nailing down the backs of wardrobes without getting wrist strain.

As mentioned, one con is that you may experience the occasional jam, but this is pretty par for the course with a small, entry level nail gun. The other con is that you’ll need an air compressor. This is normal but it does add to the price if you don’t have one already.

The other downside of course is that this is limited in terms of its maximum power. That means you’re going to struggle nailing into some materials and you may want to upgrade in future. But for hobbyists and a little home improvement, it should be up to most jobs. And more to the point, at this price it hardly matters!

Conclusion: More Than Meets the Eye

To look at, this is a rather unassuming nail gun that is somewhat plastic – although it looks nice with it. And that is what you’re getting too – there are no advanced features here and it certainly isn’t the most powerful in the world.

But in terms of entry level nail guns, this is one of the best. The only caveat is that air compressor – you may want to consider a battery operated tool if you want to save the additional expense or avoid having to carry an extra gizmo.

source http://www.toolerant.com/wen-61720-34-inch-to-2-inch-18-gauge-brad-nailer-review/

source http://toolerant.blogspot.com/2017/12/wen-61720-34-inch-to-2-inch-18-gauge.html

Garage Door Hardware: Hinges, Rollers, and Springs

The garage door is the largest and heaviest moving part of the house and is usually made to withstand the wear and tear of daily use. Garage doors are durable and can last for decades to an end, depending on how these are used and maintained.

These doors are made up of different parts that ensure the entire garage door is in good order. Through the years, however, your garage door and its parts might encounter wear and tear. Some parts might get rusty or broken and will eventually affect the operation of your garage door. Once this happens, you may have to fix or replace the parts of your broken garage door.

Here are the parts of the garage door that get broken most often than not:

Garage Door Hinges

Garage door hinges are usually located in between the third and bottom parts of the garage door. The hinges keep the sections of the roll-up doors together. These can also be found on bigger and heavier garage doors.
If they are broken, hinges usually make a squeaking sound once you open or close the garage door. Some doors also have sagging sections, which may be corrected by fixing the hinges.

Hinges are usually embossed with a number that shows the size of the hinge. Use this to find a replacement hinge for your garage door. Unfortunately, old hinges become so rusty that it’s hard to decipher the number. If this happens, just manually measure your garage door hinge. To do so, place it on a level ground. Measure your hinge from the ground to the center of the top hole.

Here’s a quick guide on the hinge number for every measurement: hinge number 1 is for those with 5/8” to 3/4″, hinge number 2 is for those with 7/8” to 1”, hinge number 3 is for 1-1/8” to 1-1/4”, hinge number 4 is for those with 1-3/8” to 1-1/2”, hinge number 5 is for those with 1-5/8 to 1-3/4”, hinge number 6 is for 1-7/8” to 2”, hinge number 7 is for 2-1/8” to 2-1/4”, hinge number 8 is for 2-3/8” to 2-1/2”, hinge number 9 is for 2-5/8” to 2-3/4”, hinge number 10 is for 2-7/8” to 3”, hinge number 11 is for 3-1/8” to 3-1/4”, and hinge number 12 is for 3-3/8” to 3-1/2”.

Garage Door Rollers

The garage door rollers allow the garage door to travel safely up and down through the garage door tracks. These rollers come in different materials such as plastic rollers, steel rollers, and nylon rollers.

When replacing your rollers, keep in mind that these are identified by the size of its diameter and stem. For the standard two-inch garage door track, the roller with 2” diameter and 4” stem will work. Larger doors with three-inch tracks use the three-inch rollers.

Next, make sure that you purchase the right make of your garage door roller. Each material has its own set of advantages and disadvantages. Find one that works for your garage door.

Garage Door Springs

The garage door springs help in counterbalancing the weight of the door to make it easier to open and close it. These come in two types: the torsion and extension springs. Torsion springs are usually located above the closed garage door while the extension springs are found at the top of the upper tracks.

With a broken spring, your garage door might quickly fall to the ground or look crooked when going up or down. You might find yourself in a dangerous situation with a broken spring as the door. This is why you need to replace it right away once you see the signs.

In choosing the replacement spring, you need to consider the length of the spring, its diameter, type of ends, and the direction of its wind. Make sure that you purchase the right spring for your garage door.

The post Garage Door Hardware: Hinges, Rollers, and Springs appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/hinges-rollers-and-springs

Perfect Christmas Gift: Where to Buy Jukebox Remotes for TouchTunes and Rowe AMI

With the holiday season in full swing, celebrations are everywhere. One of the most stressful parts of the holidays is finding the perfect gifts for the people who matter most to you.

In the spirit of gift-giving, utilitarian presents always stand out. If you’re looking for the perfect Christmas gift to someone who loves jukebox and has one at home, a jukebox remote will work for you. This is practical and super useful to the receiver, especially if he/she uses the jukebox frequently.

Jukebox Remotes

With a jukebox remote, you can do a lot of things. Instead of having to manually operate your jukebox. Most of the remotes are RF-based so you do not have to point it directly to the jukebox for it to work. These have a range of up to 200 feet and is not usually affected by interference from other RF devices.

You can adjust the volume, skip songs, give promotional credit, pause the jukebox, and assign buttons for future use with your remote. These keys are usually pre-programmed for certain functions.

Most of the standard remotes that come with the jukeboxes are not that durable. These are usually made of inferior plastic that tends to break when dropped into a hard surface. The battery compartments pop open and break off, as well. This is why it’s ideal to purchase a more durable universal or compatible remote for the jukebox.

Where to Purchase Remotes

There are different places where you can get remotes from. If you are keen on purchasing a remote as a Christmas gift for someone, look into these places:

Brick and mortar electronics stores.Find an electronics store near you and call ahead of they have jukebox remotes available. Most electronics stores carry manufacturer remotes and universal ones. However, availability might be an issue. Make sure that you call ahead in order before going to the store. The advantage of purchasing from a retailer is that you can personally check the item beforehand. Unfortunately, you might need to spend some time driving to different stores in order to find the right remote.

eBay or Amazon. Online portals, such as eBay and Amazon, has made online shopping easier for everyone. Different sellers from various parts of the world can post items and sell these at a fraction of a cost. You can have a wide variety of options for jukebox remotes. However, make sure that you buy from a trusted seller. It is easy to fall for a scammer nowadays. Check the reviews first and the return policies.

Press On Products. If you are looking for an online store that carries a more intensive selection of jukebox remotes and a more durable selection, then look no further from Press On Products. The company is a manufacturer of jukebox remotes that are compatible with Rowe AMI and TouchTunes jukeboxes. They have designed and created their remote for maximum functionality and durability. Their remotes have shatter-resistant molding and superior molded grooves. These also come with extra button options and screwed battery compartment for some extra security.

The post Perfect Christmas Gift: Where to Buy Jukebox Remotes for TouchTunes and Rowe AMI appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/buy-jukebox-remotes-for-touchtunes-rowe-ami

A Quick Guide for Linear Replacement Parts

A garage door opener is almost mandatory for every modern home. It makes lives easier with just a push of the button. You can have your garage open and ready as you’re leaving your house or as soon as you arrive. There’s no need to go and manually lift your garage door when you’re already inside your car.

Although your garage door opener is made to last you a few years, it is also susceptible to the daily wear and tear. When your garage door opener starts failing you, you need not have to replace the entire system right away. What you can do is to find the problem and address the issue by replacing the worn out parts. This is a cost-effective solution and is something that any homeowner can easily do.

If you have a Linear garage door opener, you have a ton of choices on where to purchase replacement parts. You can buy from traditional brick-and-mortar retailers or from online shops.

Here are the common parts that you might need to be replaced with your Linear garage door opener:

• Remotes. Garage door remotes often get lost ever so frequently. Just like keys, it can be too easy to misplace them. Aside from that, having an extra might also be necessary for homes with multiple garage users. This ensures that every member of the family gets an individual remote. Replacement remotes are easy to find. You just have to make sure that the remote is compatible to your current garage door opener to ensure that everything will work perfectly.

• Photo-eye safety sensors. These are one of the important parts of the garage door that’s responsible for safety. It ensures that the door reverses back on its track whenever it touches any objects. However as the years pass by, the eye sensors might get scratchy and dirty. This will affect its function and will put you and your family at risk. Replacing the photo-eye safety sensors are quite easy. Ensure that you’re purchasing Linear safety sensor that matches with your garage door opener. Installing them is quite easy as well as these come with wiring and installation instructions.

• Controllers.Linear has some pretty cool controllers as an added feature to your basic garage door opener. The Linear Iris Z Wave controller lets you control and monitor your garage door wherever you are. This gives you the peace of mind that it’s always closed. It can be installed easily and it comes with a garage door controller, mounting bracket, mounting screws, door tilt sensor, and power adapter.

• Camera kit. The camera kit is usually an upgrade for many garage door openers. This has infrared light that can be effective for low light or nighttime operations. With a camera kit, you can remotely check your home from your smartphone or mobile device.

• Receiver and transmitter. Replacement receivers and transmitters can be used to make your garage door opener or gate operator compatible with the MegaCode transmitters. This makes your garage door opener more secure and removes the possibility of code duplication.

• Remote antenna. The directional remote antenna is used to enhance the range of the garage door opener receiver. This antenna can be mounted horizontally or vertically and is effective in areas where there is a poor signal. Remote antenna replacement comes with mounting brackets and coax for easy installation. Some directional remote antennas work with a specific type of Linear receivers and with a specific frequency range. Find one that matches with your current Linear receiver and opener.

When looking for a replacement part for your garage door opener, the main priority is to make sure that it is compatible with the opener that you have. Check with the retailer and find out if the specific item matches your garage door opener.

The post A Quick Guide for Linear Replacement Parts appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/linear-replacement-parts

LiftMaster Manuals: A Walkthrough

Manuals are always necessary for all of the modern devices in today’s world. Whenever you have a new device or a software to use, there will be a manual to come with your purchase. This is necessary in order to guide every user in how to properly use or fix their device if the need be.

User Manual

A manual is a technical document that’s used to helping owners in using the devices. This is usually written by technical writers. This contains written guides for either software or hardware. It also has details on how to use the main functions of the device, troubleshooting in case of problems, frequently asked questions, and contact details if the user is looking for further help.

Importance of Good User Manual

A good user manual can be informative to every user. This ensures that the hardware or software is used properly in order to prevent it to be used improperly. Doing so reduces technical issues and other problems that may come with it.

There are many positive benefits that come with a good user manual. For one, this ensures that the product is not misused. A comprehensive manual will make it less hassle for the engineer to explain to the end-user how to use the device. It also supports the company’s branding and image to the user by making sure that it provides ample of information.

LiftMaster Manual

For garage door openers, user manuals can definitely be super useful when it’s one of the most used home devices. This will be a good resource for when you’ll encounter issues and problems with your garage door opener.

LiftMaster manuals come with every LiftMaster garage door opener or device that you purchase. With LiftMaster being a top brand when it comes to garage door openers, a LiftMaster manual will be your bestfriend throughout the years.
Depending on the kind of device that you have purchased, you will have a different user’s manual on hand. The content will also vary.

For remotes, the manuals will have a diagram on how the remote looks like. If it has code switches, there will be a drawing of the switches and how to match the codes on the remote with the ones on the garage door opener motor. There are also instructions on how to change the batteries. This might also have some safety precautions included.
If you have a LiftMaster keyless entry, there will be a detailed diagram on how you can program your device using the learn button, multi-function door control, change your existing pin, or program a temporary pin. There is also a detailed information on how to properly install and operate your keyless entry. If you will need replacement parts, there will be notes on the specific parts that you have to purchase.

A manual for your LiftMaster garage door opener is usually detailed and comes with preparation on how to assemble and install the entire system by putting together the little parts. There are diagrams and drawings to guide you through the process so you get everything right. Be mindful of the warnings and precautions that are on the pages. These should act as safety reminders when you’re assembling the garage door opener. Once this is successfully done, you need to make the proper adjustments as instructed in the user’s manual. You have to adjust the safety sensors, program your remote, adjust the travel of the garage door, and setup the control panel. There are also tips on how to troubleshoot and properly maintain your garage door opener. If your garage door opener needs to be repaired, you can check the specific repair parts that you have to purchase in the manual.

The post LiftMaster Manuals: A Walkthrough appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/liftmaster-manuals

Black & Decker BDCCS20B: A cordless circular saw worth the money?

Black and Decker tools have come a long way in the last 20 years or so, and are no longer regarded as strictly “homeowner only” tools but are instead finding themselves used more and more prominently in workshops and on job sites in the professional realm.

The Black & Decker BDCCS20B cordless circular saw is a prime example of a more professional version of the Black and Decker tool line up, the kind of tool that carpenters, woodworkers, and other experts can turn to in a pinch but certainly the kind of tool that DIYers, weekend warriors, and woodworking enthusiasts can rely on whenever they tackle a new project.

Certainly not the very best cordless circular saw available, but perhaps the very best cordless circular saw at this price point, the Black & Decker BDCCS20B is definitely well worth looking at least a little bit further into.

Check out this quick review for more inside information about this circular saw!

Initial Impressions

The first thing that you’ll notice about this Black and Decker tool is that it is a lot heavier and a lot more “premium” feeling the and most every other Black and Decker tool out there in the last 15 years or so.

That’s because the engineers at Black and Decker have definitely started to introduce better and better construction materials, smarter design, and more reliable components into their premium level tools, and the Black & Decker BDCCS20B circular saw is a perfect example of this new forward thinking approach.

Not the heaviest cordless circular saw out there by any stretch of the imagination, this unit is still pretty lightweight, still easy to control, and will not fatigued you quite as much as some of the other more hefty and premium options available on the market.

You shouldn’t have to worry about cruising right through most construction materials (though anything larger than a 2×6 might heat the unit up a little bit), but all in all this is a tremendously impressive unit that won’t let you down – as long as you respect and understand its shortcomings and don’t push the limits of this unit outside of its comfort zone.

Standout Features

The introduction of a 20 V lithium-ion power plant makes this Black and Decker cordless circular saw a bit of a heavy duty unit, though it still isn’t quite as powerful as corded options are (but what cordless tool ever is?).

The lithium-ion battery is going to recharge really, really quickly (we are talking about going from dead to a full charge in about two hours or so), though the you should only really be able to expect between four and five hours of consistent use out of a full battery.

This is quite a bit short of what the professional cordless circular saw options out there bring to the table (with most promising at least eight hours of run time on a single charge), but for hobbyists and enthusiasts this is plenty of juice to get most weekend projects done.

The included multipurpose circular saw blade that this unit comes with is plenty enough to choose through construction materials but also accurate and find enough to help you cut through finish materials, though it isn’t going to produce quite as clean or as consistent a cut as some of the higher quality (and admittedly more expensive) finish blade options out there.

This is a rip saw through and through, but there’s not any shame in that. If you need something that you can kind of beat without feeling bad about putting it through its paces, this is the cordless circular saw you’re going to want to reach for – especially at this price point!

Pros

• Tremendously lightweight, the Black & Decker BDCCS20B isn’t going to fatigued you very much when you are using it for extended amounts of time. The ergonomics with this circular saw are also pretty impressive, giving you complete control for precision cuts.
• You really cannot beat the price point of this particular cordless circular saw from Black and Decker. Comparable units are easily going to cost two, three, and even four times as much as this circular saw. It offers plenty of “bang for your buck”.
• The lithium-ion battery power plant system gives you extra juice for heavy duty cuts but also guarantees a relatively long run time between chargings. You’ll have to invest in a secondary battery for sure, but that’s a no-brainer with any cordless tool.

Cons

• At the end of the day, the Black & Decker BDCCS20B just isn’t going to be able to go toe to toe with some of the more powerful and higher-quality cordless circular saws from companies like DeWalt and Makita. It just doesn’t have that level of quality or those kind of precision components, but it also doesn’t have a considerably higher price tag to make those things possible.
• There is always a risk of this relatively lightweight cordless circular saw binding in the middle of heavier construction materials, so that’s something that you’re going to need to be aware of right off the bat. As mentioned above, definitely don’t try to push this circular saw out of its comfort zones. You’ll almost always regret it with a safety issue.

Who’s going to be able to get the most out of this tool?

Homeowners, weekend warriors, and DIY enthusiasts will be able to make the very most out of this budget focused cordless circular saw. Professionals will definitely want to spend a little bit more to get a higher-quality unit, but this circular saw can still be used for light work without having to blow up your budget.

Final Verdict

Inexpensive, relatively compact, and plenty capable, there are a lot of things to really appreciate about the Black & Decker BDCCS20B cordless circular saw. You’ll want to purchase a second battery (at least one extra), the rapid charging module, and some higher-quality circular saw blades to get the most out of this unit, but it’s a pretty accomplished tool designed for homeowners and amateurs.

source http://www.toolerant.com/black-decker-bdccs20b-a-cordless-circular-saw-worth-the-money/

source http://toolerant.blogspot.com/2017/12/black-decker-bdccs20b-cordless-circular.html

The Monarch Keychain Remotes

Garage door openers are necessary for every modern home. Having one can add convenience to daily lives of the homeowners. It makes it easier to open and close the garage door whether you’re nearby or an ocean away.

The Importance of Garage Door Remotes

With your remote, you can easily open or close your garage door without having to manually lift it open or pull to close. While you’re pulling up to your home, you can already have your garage door ready.

Remotes can also allow you to control your home lights, depending on the kind of garage door opener system that you have. Such convenience definitely suits the busy life of modern homeowners.

Your garage door opener remote is your best friend if you have a garage door opener. It should always be with you since it gives a quick access to your home. You wouldn’t want to give anyone an easy access to your home. Often stolen garage door remotes can lead to theft in the home. This is why you need to keep your garage door remote with you all the time.

The Benefits of Keychain Remotes

Although garage door opener kits already come with their own remote, you might need extra as a spare or for other members of the family. Since these devices are necessary for every home, there are already tons of manufacturers making parts and accessories for garage door openers.

If you’re in the market for a small garage door remote that’s handy, then you should pick out a keychain remote. This is something that fits in your pocket without being too bulky. You can easily carry it with you and it can go on your key holder with the rest of your home keys. There’s no need to leave your remote inside your car or your purse where it’s most likely to get stolen.

One of the best keychain remote today is the Monarch keychain. This is a trusted name in garage door remotes.

The Brand

Monarch keychain remotes are made by Transmitter Solutions. This manufacturer is the largest supplier of receivers and transmitters in the US. Transmitter Solutions has been around since 1995 and takes pride in its specialized manufacturing and engineering technologies. They have years of experience and has a wide customer base. They manufacture a complete line of fobs, transmitters, receivers, and access control cards.

The Monarch remotes are the keychain versions Elite and Doorking garage door openers. These keychain remotes were made to be compact and to be easily compatible with different garage door opener brands. These also offer superior durability and longer frequency range. A Monarch remote is the best option if you have a high-tech home.

These remotes have HIID Proximity Tags that alert the garage door opener system when you’re within proximity. Monarch remotes also have extra security features that many garage transmitters don’t have.

Monarch carries different keychains. It has one-button, two-button, or four button remotes so you are able to control multiple devices. There are remotes with dip switched for older garage door openers while there are remotes that work with openers that have the rolling code technology. These are powered by long-lasting lithium batteries so there’s no need to worry about power issues.

Monarch Remotes Compatibility

These keychain remotes have specific model numbers that show the kind of garage door opener and the brand that they work for. So, make sure that you check this before making a purchase. You need to match the Monarch remote to your garage door opener model and to your home’s needs. The compatibility should be your primary concern when making a purchase.

The post The Monarch Keychain Remotes appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/monarch-keychain-remotes

What are Safety Beams Sensors For Garage Doors

Genie’s Circuit Boards and Logic Boards for Garage Doors

Garage door openers usually stand the test of time. These nifty devices will operate for years or decades, especially when used correctly. However, there will be times when the garage door opener will encounter problems especially when it’s had its own share of wear and tear.

There will be times when the garage door will fail and not operate. One of the common causes of this problem is bad circuit boards.

The logic board is the brain of the garage door opener. This is also called a circuit board.It has the radio frequency receiver for the garage door opener remote and the other components.

A bad circuit board happens when the garage door remote does not work or when the garage door opener does not operate properly. When this happens, check your remote and the other garage door opener parts to see if there are wear and tear. If this is not the case, then you might need to replace your circuit board. This is a more affordable alternative compared to purchasing a new unit.

The Brand and Its Circuit or Logic Boards

Genie was founded in 1923 as the Alliance Manufacturing Company. To this day, the company maintains its roots and provides homeowners with original replacement parts that you need to fix your garage door opener.

It was in 1954 that the company first created its own garage door opener named Genie. This was the first mass-produced residential garage door opener. In 1994, Overhead Door Corporation purchased Genie. At that time Genie was already a symbol of reliability and quality.

Today, Genie creates garage door opener systems and accessories. Their openers have advanced features and security to suit the modern homeowner’s needs.

Through the years, Genie has been manufacturing under different brands such as Alliance, Python, Lift-a-Door, Norelco, Intellicode, Overhead Door, BlueMax, Exclerator, Hercules, and Code-Dodger. Most of the Genie circuit boards have also had different model numbers through the years. Because of this, it might be a challenge to find the right logic board.

How to Find your Genie Logic Board

When looking for a Genie logic or circuit board, make sure that you check your garage door opener first. Look into the logic board of your opener and find that white sticker that has the part number of your current board.

Make sure that you have the original board number and the service number in order to find the replacement Genie board for your garage door opener.

You can ask the retailer or shop for a compatibility chart when you’re unsure of the specific logic board that matches your garage door opener.

How to Replace your Genie Logic Board

Once you’ve had the right logic board, you might need to start installing it and replacing your old one. This can be done in 20 to 30 minutes by yourself without calling a professional installer.

• Unplug and open your motor.Make sure that you unplug the garage door opener first before you start. Then, take down your garage door opener by pulling the emergency cord and closing your garage door. Reach the garage door opener motor and remove the cover, LED light, and back panel cover. This gives you access to the circuit board.

• Disconnect wires and remove the board. Look inside the housing and find the wires that are connected to the circuit board. Disconnect the wires with your screwdriver and just let them dangle. Loosen the screws that are holding the board in place and remove the circuit board.

• Install the new circuit board and replace the pieces. Install the new circuit board in place and secure it with the screws. Reinstall the wires and lock them in place. Replace the rest of the pieces of the garage door opener and plug in your unit for testing.

The post Genie’s Circuit Boards and Logic Boards for Garage Doors appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/genies-circuit-boards

Featuring Firefly 300MCD21K and Stinger 300MCD21V Garage Remotes

Garage door remotes are little devices that we often don’t give that much attention to. However, these important gadgets that make our home life easier. Garage door remotes open and close the doors whenever we need to. This allows you to open your garage door as you leave the house without any problems.

If you are looking for an extra garage door opener remote for your home or you need to replace your old remote, the Firefly 300MCD21K and Stinger 300MCD21V garage door remotes can be good options. These two are handy remotes that can definitely fit your needs.

Firefly 300MCD21K Garage Door Remote

This is a transmitter solution that is used to replace Multi-Code remotes such as the 3089, 3060, or the 3070. The Firefly 300MCD21K is compatible with the Multi-Code and Linear transmitters and receivers.

It is a single-button garage door opener remote that will work for homes with only one garage door opener. It has a 300 MHz frequency and is powered by a 12-volt battery that’s long-lasting. This remote is also durable and has an LED light that indicates when transmissions are successfully sent.

The 300MCD21K is also easy to program. It has a 10-dip-switch design for extra security and also quick programming. To program this remote, just find the dip switches on your garage door opener and match these with the dip switches on your remote. Make sure that the position of every switch is the same.

The remote is a keychain model which allows you to bright it with you anywhere you go. Instead of carrying and leaving a bulky remote in your car or in your purse, this ensures that your garage door remote is safe. Nobody can easily get your remote from your car. This prevents any burglary that may happen once you forget or leave your remote in the car.

Stinger 300MCD21V Garage Door Remote

This is another handy garage door opener remote. The Stinger 300MCD21V can be used to replace the Multi-Code 3089 garage door remote. It also operates on different Multi-Code transmitters and receivers. It has 10-dip switches and is powered by a 12-volt battery for a longer lifespan. This runs at 300 MHz frequency. It is durable and has a better range than other similar remotes.

This one-button remote only requires only a light push to function. It can be programmed easily. You just have to match the position of the dip switches on your remote and on your garage door opener motor.

This remote is small and handy. It comes with a visor clip so you can easily leave it inside your car. You don’t have to go through your bag just to search for your remote. This is a convenient solution if you frequently drive the car out of the house and you just want a remote to use whenever you’re inside. If you keep your garage door remote inside your car, just make sure that you lock your doors and never leave it open even when you’ve parked at home. This might cause a theft in your home.

Last Notes

Remember that when you’re choosing a new remote control for your home, you have to make sure that it is compatible with the current garage door opener that you have in your home. To check compatibility, look into your garage door opener’s model and read through the user’s manual. You can also inquire with the seller and ask for assistance if you’re in need of a garage door opener remote. Just specify the kind of remote that you need and provide the make of your garage door opener.

The post Featuring Firefly 300MCD21K and Stinger 300MCD21V Garage Remotes appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/firefly-300mcd21k-and-300mcd21v

Where to Buy Garage Door Opener Gearkits

Garage door openers are must-haves in every modern home. It makes everyday life convenient by being able to control your garage door without having to manually lift it. This is a time-saver and an extra layer of security to one’s home.

Although garage door openers are made to be durable, there will be times when you need to fix your garage and replace certain parts so it will still operate smoothly. One of the usual parts that get broken a lot is the gear kit. You’ll notice this issue when your motor sounds like it is running but the garage door is not moving. Just inspect the motor and you’ll see if the gear kit is worn out.

Tips in Purchasing Gear Kits

When buying replacement gear kits, you need to identify the type of garage door opener that you have and your specific model. The chain-drive opener has a different gear kit compared to the screw-drive openers. This should be your consideration. In addition to that, certain brands from the same factory usually have similar gear kits. This makes it easier to find garage door opener parts for your needs.

Make sure that you note your opener’s specific model number and brand when you make a purchase. There are gear kits that are model-specific so you need to look into the information first. Other replacement gear kits are also labeled by the year. Ensure that you inquire or ask assistance before you finalize your purchase.

Where to Purchase Gear Kits

There are many different options when buying gear kits. Traditionally, you can purchase replacement parts from the brick-and-mortar retailers. However, with the internet becoming commonplace, you can already purchase gear kits from different online stores.

Manufacturer dealers.If you want to be specific with the gear kit that you’re going to buy, then your best bet would be going to the manufacturer dealers in your area. Depending on the brand of garage door opener that you have, you can find a local dealer near you. This ensures that you get a gear kit that matches with your specific garage door opener and you can get the assistance that you need if you have additional questions.

Home improvement stores. This is another common option for many homeowners. There definitely are home improvement stores in most locations. Stores like Home Depot, True Value, Lowe’s, Ace Hardware, and others have a selection of garage door gear kits and other replacement parts that you may need. Just visit your nearest home improvement store. You can also check out their online stores and look into the availability of the gear kit that you need.

A Click Away Remotes. This is a one-stop online shop for all of your garage door opener needs. This store keeps a wide selection of garage door opener units and replacement parts for different brands. The store has compatibility charts to help you in making a purchase. They also offer a money-back guarantee with the best customer service online.

eBay. If you prefer checking gear kits from different sellers, then you can check out eBay. There are a ton of selection on eBay. However, you might need to scour through the listings in order to find one that suits your needs. Make sure that you know the kind of gear kit that you need. You can also contact the seller before making a purchase. Just ensure that you are able to have the item returned in case you get the wrong one.

Amazon. Amazon also works like eBay wherein there are different sellers offering similar items. Check out the specific gear kit that you need and ensure the compatibility. Look into the refund and the return terms as well before you make a purchase.

The post Where to Buy Garage Door Opener Gearkits appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/garage-door-opener-gearkits

The 4 Coolest Things You Could Add to Your Living Room

DEWALT Bare-Tool DC390B Review: Light and Shadow

As the DIY craze sweeps the nation with no sign of dying out there are more and more people who are doing at home repairs or projects. For some of these people it might not matter what kind of tools or equipment they use – they simply borrow needed supplies from a neighbor or a friend. Others may do more research into what they need for ease of having it in their own home whenever they want to work on their project. These handymen will go beyond the regular hammers, screwdrivers, wrenches, and nail guns. As they venture into doing more and more work around the house they will often find themselves in need of a good circular saw.

Circular Saws are often battery operated (to keep the user from accidentally cutting the cord as they work), and able to be manipulated into tight spaces. The problem with battery operated versus corded saws lies in the power that the saw has. No matter the power source, most circular saws are perfect for ripping lumber, hard and softwood, particle board and plywood when you’re building. When choosing a circular saw it’s always a good idea to go with a trusted name like DeWalt. Established companies will stand by their products and make sure that they will be covered by a warranty. Especially for the new user, warranties are useful as you learn your way around your new tools.

So who needs this tool?

As we’ve discussed, this tool is perfect for the handyman who needs to rip large pieces of wood. It’s perfect if you’re renovating a room in your house, such as your bathroom. The DeWalt DC390B can be used to cut lumber to frame out your room then immediately used to cut the plywood that will be used to cover the floor. It comes with a left-mounted blade that makes it easy for most users to see exactly where they’re cutting and to follow a line as they work. Even carpenters by trade love this circular saw. It helps them quickly cut the wood that they need to finish projects for their customers. This saw would be particularly helpful in building a deck. It would be an easy thing for the user to line up all the wood that needed to be cut and quickly work down the row, getting everything ready to build at once.

The DeWalt DC390B is superior to other circular saws in a few ways.

• The design and balance of this circular saw are perfect. There’s just enough weight and heft to it that it doesn’t bounce around when making long cuts, but it is light enough for the average user to handle it easily without quickly becoming too tired to continue working. Not everyone understands the importance of a well-weighted circular saw, but the danger of having one bounce up from the cutting surface while still running can’t be understated.
• Another wonderful safety feature is that the blade stops spinning quickly after use. When the blade continues to spin freely it’s easy to accidentally keep cutting the wood you’re working on, or even worse, part of your body. DeWalt thought this through when they made sure that this circular saw would be as safe as possible to operate.

Like anything though, the DeWalt DC390B does have some drawbacks.

• Like any cordless tools, the battery life of this circular saw is lacking. Some users, like professional handymen, may find that having multiple batteries on hand and constantly charging is one way to get around this issue. For others that won’t be something that can be done easily, as the spare batteries are quite expensive. Constantly keeping the saw charging when not in use is one way to work around this issue, although many users will find that to be too much of a pain to do consistently. Nobody wants to worry about their tools not working right in the middle of a big project, and the battery dying can be very frustrating.
• There’s also no case that comes standard with the DeWalt DC390B. Cases can be picked up easily and cheaply, but for someone who travels with their tools this is something that they should consider. When you pay a lot of money for quality products it’s important to protect them. If the circular saw is simply left in your garage or basement for at-home projects then a case might not be as important to you as it is to someone who will travel with it.
• Another concern is that since the battery doesn’t last very long the circular saw itself won’t be as powerful as another one that is corded or comes with a stronger battery. Again, this is something to consider depending on how often and for how long you’ll be using the saw. Spare batteries are the easy (but expensive) way around this problem. Due to the fact that the batteries run out quickly and the saw loses power it’s not possible to simply force the saw to finish a difficult cut like you can with a corded saw. Once this circular saw is done and stuck you are left with the only option of trading out the battery or waiting for it to charge. Corded saws can be manually powered through a hard cut, which means no extra wait time for the user.

Conclusion

For the average user the DeWalt DC390B seems like a wonderful fit. It’s not the most expensive circular saw on the market and does come with some wonderful reviews of users who swear by using it. The design, ease of use, and affordability all need to be weighed against the power and battery life. Although DeWalt stands behind it’s products with a wonderful warranty, that warranty won’t apply to a users’ frustration over how quickly the product loses power when in use. For the quick and easy project around the house this seems like an affordable option. But for the more regular user or the professional, extra batteries don’t seem to be optional.

source http://www.toolerant.com/dewalt-bare-tool-dc390b-review-light-and-shadow/

source http://toolerant.blogspot.com/2017/11/dewalt-bare-tool-dc390b-review-light.html

LiftMaster 371LM and 971LM Features and Specifications

A garage door remote usually comes with the purchase of a garage door opener kit. Often, just a single remote will not suffice. You may need extra remotes for the rest of the family who also uses the garage regularly. Aside from that, your old garage remote might need to be replaced.

LiftMaster’s 371LM and 971LM remote models are two of the bestselling remotes from this trusted brand. If you are looking into purchasing new garage door remotes, then you might want to look into these two replacement remote models.

LiftMaster 371LM

The LiftMaster 371LM is a basic garage door opener remote that’s not so basic.

This remote is designed for garage door openers made after 2005 with the 315 MHz frequency. This will operate on garage door openers with the purple LED light, found at the back of the motor, and with remotes that have black or silver buttons.It also works with LiftMaster commercial door operators and gate operators.

LiftMaster 371LM has a code rotating technology for extra security and also offers an Enhanced Radio Technology (ERT). The remote is easy to program and to use.

What’s interesting about this garage door remote is that it does not interfere with military radio frequency. The typical military radio equipment operates at 390 MHz which is close to the usual frequencies that garage door opener operates in. This entails frequent interference in the garage door opener function. To solve the interference problem, homeowners might need to purchase a conversion kit that allows your garage door opener to operate at a frequency that’s different from the military’s Land Mobile Radio.

The remote only has a single button and is best for homes with only one garage door. This opens and closes the garage door and also turns on and off the garage door opener lights. It comes with a visor clip for convenient vehicle use and a lithium battery that lasts for up to five years.

LiftMaster 971LM

This is another simple garage door opener remote from LiftMaster. The 971LM is a directional visor clip that includes a 3V lithium and rolling code technology for extra security. This remote works with garage door openers that operate in 390 MHz frequency and those with reddish-orange learn button on the motor head.

It is a single-button garage door remote that’s compatible with garage door openers made from 1997 and up to the present.

The LiftMaster 971LM remote is compatible with the garage door openers that have the Security+ systems, including Sears, Craftsman, Raynor, and Chamberlain openers with rolling codes. It works with the Chamberlain 950CB, 953CB, and 956CB. The remote also works with Sears garage door openers, specifically 139.53661, 139.53677SRT, 139.53661SRT, 139.53677SRT3, 139.53661SRT3, 139.53680, 139.53662, 139.53681, 139.53662SRT2, 139.53684, 139.53663, 139.53961 139.53663SRT, 139.53961SRT, 139.53664, 139.53962, 139.53664SRT, 139.53962SRT, 139.53664SRT2,139.53962SRT1, 139.53670, 139.53963, 139.53670SRT1, 139.53963SRT, 139.53671, 139.53964, 139.53671SRT, 139.53964SRT, 139.53671SRT3,139.53966, 139.53672, 139.53966SRT, 139.53672SRT, 139.53966SRT1, 139.53672SRT2, 139.53974, 139.53672SRT3, 139.53974SRT, 139.53673, 139.53975, 139.53673SRT, 139.53975SRT, 139.53673SRT3, 139.53975SRT1, 139.53674,139.53976, 139.53674SRT1, 139.53976SRT, 139.53674SRT2,139.53978, 139.53675, 139.53978SRT, 139.53675SRT2, 139.53978SRT1, and 139.53677.

The great thing about this remote control is that it’s simple and easy to use. You can immediately program it without a sweat. This is perfect for homes with only one garage door opener.

Conclusion

When purchasing garage door opener remotes, make sure that you purchase one that is compatible with your garage door opener. This rule is applicable to both replacement garage door remotes and extra remotes. Check the model of your garage door opener first and double check the compatibility. Inspect the color of your LED light and read your opener’s manual to make sure you’ve got it covered.

The post LiftMaster 371LM and 971LM Features and Specifications appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/liftmaster-371lm-and-971lm

Review: Roberts Model 10-600 Professional Electric Stapler!

An electric stapler can be very useful for upholstery. If you like making furniture, then no doubt you will occasionally find yourself wanting to add a pattern or some color. Maybe you want to attach a cushion? In short, maybe you don’t want to make do with a hard wooden chair…

The question then is how you go about attaching that material element to your woodwork. And the answer is with an electric stapler. But that’s not all you can do with an electric staple gun. These tools are also very useful for installing sheets of installation, installing carpet and even hanging LED lights. These are one of those tools that make life easier and even if you don’t realize you need one, once you get one, you’ll find that lots of applications and uses suddenly present themselves.

The question though, is how you go about choosing an electric stapler and how you ensure that you are getting a tool that will perform well and handle everything you need it to. Is the Roberts Model 10-600 just such a tool? We tested it for a while and here’s what we have to say…

Product Description: Well Made and Good to Use

This is a nicely made staple gun that looks quite attractive actually in polished chrome and red. It also comes with a carry case, which is always a nice additional touch and can be handy for storage and transportation. The handle is comfortable enough to hold and the trigger is easy to reach. It’s also light enough to use, though this isn’t as big a dealer generally with a staple gun as it is with a nail gun.

Note that his is a pneumatic tool. That is to say that you’re going to need an air compressor to get it to work. If you don’t already have an air compressor, then you should factor this into the overall price. However, an air compressor is generally a very useful tool and can be bought fairly cheaply – it’s something that any home improvement aficionado should own anyway!

To use, the Roberts Model 10-600 offers a great experience. It rarely misfires (though this does happen on occasion and is more common with staple guns vs nail guns) and doesn’t tend to jam. It’s more than powerful enough for the vast majority of tasks and it is light and good to use. In our tests we found it reliable and pleasant and one reviewer with arthritis said she had no problem with it – so that’s a pretty good testament!

Pros and Cons: Awesome on the Whole

The big pro with the Roberts Model 10-600 is that it works incredibly well and is reliable. What more can you ask for really?

This is a light and easy to use tool that is plenty powerful enough and that doesn’t tend to jam or misfire. As mentioned, misfires as a little more common with staple guns so it will happen, but it’s really not a big deal.

While this is true though, there are always going to be a few caveats with any tool and this is no different. For us, the Roberts Model 10-600 worked perfectly and was a joy to use but there are a couple of complaints about faulty units. This is a common issue to be fair though and you shouldn’t let it put you off too much – it just means that the company could possibly stand to improve its quality control.

The only other issue that one review mentions, is that if you put a staple in the wrong place it will be a struggle to get out. But that just shows you how powerful it is!

Conclusion

Overall, there isn’t really much you need from a staple gun. It just needs to put staples in your materials reliably. The Roberts Model 10-600 does that and so it comes with our full recommendation. This is a well made staple gun that works reliably, doesn’t tend to misfire and comes with a nice carry case. There aren’t many fancy features but you don’t really need any for a staple gun.

source http://www.toolerant.com/review-roberts-model-10-600-professional-electric-stapler/

source http://toolerant.blogspot.com/2017/11/review-roberts-model-10-600.html

Tips, Advice, and Guide: When to Change Your Garage Door Opener

NuMax SFR2190 21 Degree Framing Nailer Reviewed!

There are some tools you’ll keep in the workshop and rarely use. These are your specialist tools that aren’t going to be that practical on a daily basis, but which are rather specialist tools that you bring out for particular purposes.

The nailer is no such tool. This is something you’re going to be bringing out on a highly regular frequency if you’re a professional and for a range of tasks. Hobbyists may use these a little less often but will still find they have a surprising number of applications. So, it needs to be good! Is the NuMax SFR2190 21 Degree Framing Nailer up to the task?

Product Description: Nailed It!

If you’re looking for a powerful and capable framing nailer, then this is it! A framing nailer of course will save your arm when it comes to firing lots of nails and is far easier to use for long stretches when compared with something like a framing hammer. It’s also very useful when you need to get into tight spaces and can be used in a surprisingly wide variety of scenarios when you’re tightening up furniture etc.

This specific device has a range of useful features. It has an adjustable depth for instance, which makes it easy to switch between different sized nails. There’s also a very useful jam removal hole, which will make it easy for you to quickly solve any jams and get right back to work! But it is well made enough that this isn’t much of an issue anyway, as it hardly ever jams! You’re also unlikely to experience misfires.

The nailer may be a little heavy for some but it is very well made and very durable. It is light and dark grey with a comfortable handle and a rather large head. It looks like a quality piece of equipment for the price.

Pros and Cons: Not the Best but Not Bad!

This is a great framing nailer for many reasons. The price is very welcome for instance, the power is good and the system is easy to use. You can adjust the pressure and it goes plenty high enough for the vast majority of applications.

But there are downsides too. There’s no bump fire switch and rather you need to swap the trigger out (the bump fire trigger is included). That’s not a big deal but could take a little more time for production nailing. The depth adjuster is a little stiff at times and there’s no specific jam removal tool. This again isn’t the end of the world but it is a bit of a disappointment considering that most of the biggest brand names do include a jam tool for this price. But this is less of a problem than you might think, seeing as it hardly ever jams. We have run a good few hundred nails through it in our testing and found that it hasn’t jammed once – so that’s very positive.

It’s also important to consider that there’s no belt hook or ladder hook and that the tool can be occasionally inconsistent depending on the hardness of the wood and how you hold it.

One more odd and annoying feature we found is that the magazine would stop when it gets down to three nails. Of course, that isn’t the end of the world, it essentially means that the nailer has a slightly (3 nails) smaller capacity in practice.

But while it’s not a deal breaker, it’s certainly an odd choice and would be better were that not the case. Who knows what is going on there!

Conclusion: A Great Purchase

In short, this is a great purchase for those looking to save money but who still want some good power and performance from their framing nailer. This won’t jam on you, won’t misfire and will be powerful enough to handle the vast majority of jobs. Nevertheless, it is also very affordable and not too heavy. There might seem like a lot of negative points in this review but these are small niggles rather than serious issues. On the whole, you’re getting something that is powerful, reliable and that never misses a beat. That is really what matters and for the price, we really were very impressed with this nailer!

How does it compare? Read this!

source http://www.toolerant.com/numax-sfr2190-21-degree-framing-nailer-reviewed/

source http://toolerant.blogspot.com/2017/10/numax-sfr2190-21-degree-framing-nailer.html

PORTER-CABLE 382 5-Inch Random Orbit Sander Review

Sanding off a piece of furniture is a great way to improve the finish and to prevent splinters and imperfections. It ensure that your surfaces are level and gives everything a professional sheen that makes it look like it came from IKEA.

A belt sander is a highly powerful sanding tool that will allow you to create curved edges and perform a range of other applications. But for hobbyists and casual DIY fans, that’s going to be overkill. Instead, an orbital sander might prove to be more appropriate and in that case, you can do a lot worse than the PORTER-CABLE 382.

We decided to put the PORTER-CABLE 382 through its paces for a few days to see how it would measure up to other products and whether or not we could recommend it. We’ve found that it’s a great tool for a lot of reasons and can recommend with only a few reservations.

Product Description: A Good Design All Round

The PORTER-CABLE 382 isn’t terribly attractive to look at in all grey and does have a couple of design faux-pas in our opinion. Other than the color choices, the off putting thing for us is that the wire comes from the top of the device. This means that it’s going to get in the way more than it would in another location and that can be slightly problematic when you’re using a tool that requires manual dexterity. There’s also no handle as such, just an area to grab around the top of the device.

That’s not a deal breaker though and actually, during our review process, we found it to be satisfying to hold and relatively easy to operate for the most part.

The sanding speed meanwhile is very good and there is dust collection here too, which will allow you to collect dust as you go and then throw it out.

Pros and Cons: Very Good but Not the Best

The best thing about the machine is the decent performance and high RPMs. This really does sand things down quickly for the size and cost and is very enjoyable to use on the whole. If you have been using belt sanders until now, then you might find that this makes certain jobs a whole lot easier. Of course it’s still not as powerful as a belt sander and you can’t use it to create rounded edges etc. It will just about remove paint but this can take a while.

It does what it sets out to, is light and easy to use and comes in at a very fair price.

But as mentioned, there are a few design mistakes here too though and it’s certainly not perfect. We don’t love the wire positioning for example and we also find the color a little off-putting. Something else we noticed is that during extended use it can get a little hot and unfortunately the majority of that heat seems to be just where you hold it…

Another issue is the dust collection attachment which is a bit loose, drops a lot of dust and fills up very quickly indeed. So, there are a few cons here as well…

Conclusion: Consider the Rest

This isn’t a bad orbital sander and it will certainly make sanding quick, easy and a little more fun. But as mentioned, it’s also not the best. If you’re in the market for an orbital sander, then you might want to shop around.

And that’s really the most damning thing we can say about the PORTER-CABLE 38: it’s just not as good as some of the competition. Take the BDERO100 from Black and Decker for example. That comes in a little bit cheaper, it doesn’t get hot, the wire comes out the bottom and it has a much nicer looking design that is actually appealing to use.

When there are clearly better options on the market, it’s hard to recommend this and especially as the Black and Decker model is a little more powerful. Some people also say that the last PORTER model was also superior.

So, shop around and look for something better. But if you do end up getting the PORTER-CABLE 382, it will still do a good job. Make sure to read this review to find the best random orbit sander.

source http://www.toolerant.com/porter-cable-382-5-inch-random-orbit-sander-review/

source http://toolerant.blogspot.com/2017/10/porter-cable-382-5-inch-random-orbit.html

Top 4 Reasons Your Garage Door Remote Stopped Working

Garage Door Openers

Technology has come a long way. In today’s world, most of our daily activities have something to do with technology. It’s not just in our jobs that most tasks are digitized. Even at home, the usual home processes are already automatic and can be done digitally.

 

 

One of the items at home that have gone automatic and even smarter is the garage door opener. Before, an automatic garage door opener would open or close the garage door with a push of the button. These buttons can be in remotes or in-wall switches. However, most of the garage door openers today can do so much more than just automatically open and close your garage door.

The History and Discovery

The first garage door opener was invented in 1926 by CG Johnson. He started the Overhead Door Company to sell the electric garage door openers to pair with his other invention, the overhead sectional garage door that came out five years prior.

The electric motor of the garage door opener does not have the power to move the garage door. The weight was mostly offset by the counterbalance spring.

Back then, the electric garage door openers were operated through a switch that was wired to the device. There were two switches, one placed inside the garage and the other placed outside.

Although the invention of the electric garage door was done in the early 20th century, it wasn’t all that popular until the later years.

Types of Garage Door Openers

Today, there are already different types of garage door openers available in the market. Each type has its own distinct advantages and disadvantages that work depending on the kind of home that you have and the lifestyle that you lead.

• Chain-drive garage door opener.

– This has a metal chain that drives the trolley, which raises or lowers the garage door. This type of garage door opener is one of the most popular options among homeowners and is widely available. It is cost-effective and durable. However, it can be noisy during operation. The chain-drive opener is best for heavy garage doors, like wooden doors, insulated doors, or oversized doors. Because it is noisy, it works for homes with detached garages so the sound won’t be an issue.

• Belt-drive garage door opener.

– This type of opener works like the chain-drive opener. Instead of a chain, this has a rubber belt that allows the trolley to move. Thus, it has a smoother and quieter operation. Since it is quiet, it can suit homes with an attached garage especially those with living spaces above it. The belt-drive garage door also has a few moving parts, which makes maintenance a breeze. Unfortunately, this garage door opener can be a bit expensive.

• Screw-drive garage door opener.

– This opener has a threaded steel rod in order to move the door. While the rod rotates, this drives the trolley in order to open or close the garage door. The screw-drive opener is usually quieter compared to the belt-drive opener. It also requires less maintenance because of its few moving parts. This opener can be a reliable option for single-car garage doors that are attached to the home. It tends to operate faster compared to the other types of garage door openers.

• Direct-drive garage door opener.

– This has a quiet mechanism with the motor operating as the trolley. It travels along the track, which opens and closes the garage door. With just a single moving part, this reduces the noise, vibration, and the maintenance requirement of the garage door opener. This type of opener usually comes with a lifetime warranty and are durable. However, this tends to be pricey.

The Power

With varying garage door opener types, there are also varying horsepower ratings depending on the opener. The horsepower rating refers to the lifting power of the different garage door opener models. These ratings range from ½ horsepower to 1-1/2 horsepower.

• 1/2 horsepower model.

– Consider this opener for standard garage doors. When paired with the right drive, it can lift most of the garage doors. However, keep in mind that heavier doors like wooden or insulated ones can strain it. It can work for smaller single-car garages.

• 3/4 horsepower model.

– This is the higher rating from 1/2. This model works for wooden or insulated garage doors. It also works for two-car garages. It is more powerful so it can lift heavier doors without wearing out the motor. Its motor is more durable and can be long-lasting. Unfortunately, this durability can also mean that it’s more expensive.

• 1 or 1-1/2 horsepower model.

– This opener is perfect for heavier and more industrial doors. It comes with maximum power and efficiency that is great for oversized garage doors and even for commercial or industrial ones. Having more power definitely adds to its price tag. However, this garage door opener can also be used for regular residential garage doors so that it’ll have less wear and tear during the operation.

Features

Garage door openers do not just open doors today. In fact, they already come with various features that add value to the homes and to the homeowners as well.

• Home automation. – Some garage door openers allow you certain connectivity to the home. There are those that have lights control so you can turn on and off the lights in your home through your garage door opener system.

• Auto-close function. – This security feature automatically closes the garage door after a certain period of time. It is usually pre-programmed by the owner.

• Battery backup. – Having this extra feature is handy, especially during a power outage. This lets you operate your garage door without using it manually.

• Wi-Fi connectivity. – This lets you connect to your home’s network so you can operate and connect to your opener through your device.

• Smartphone compatibility. –This can be built-in with your garage door opener kit or it can be an extra feature to be purchased. With this feature, you can control and monitor your garage door opener through your mobile device. You can get real-time updates about its status and you can allow access any-time wherever you are.

• Automatic lights. – These are courtesy lights that turn on as the door opens or through the opener’s motion sensors. This will automatically turn off after a set period of time.

• Vehicle compatibility. – For some garage door openers, vehicle compatibility allows you to operate your garage door through your car. The controls can be built into the vehicle.

There are still many features that a garage door opener can come with. This depends on the make and brand of the garage door opener. Some features are extra and have to be purchased and installed while others are already included in the garage door opener kit. The price of the opener will also vary depending on the features that it comes with.

Maintenance

The garage door opener also requires regular maintenance to make sure that it is safe to use and it operates accordingly. This is especially important since the garage door is the largest moving part of the home.

• Check the garage door.– First, you need to check the garage door itself. Inspect the moving parts for some rusting and lubricate the moving parts once a year. Check for some wear and fraying on the metal parts, rollers, rail, bearings, hinges, and springs. Make sure that nothing is broken and there are no weird sounds.

• Test the alignment and balance.– Disconnect the garage door opener from the door by pulling the emergency cord. This should allow you to pull up and down your garage door easily. Your door should be light and should operate smoothly. If it doesn’t, then the door is misaligned. Open your garage door halfway and release it. It should remain in place. If it falls down or rises up, then it is out of balance. You need to contact a professional if this happens.

• Test the safety reversal system.– Garage door openers need to have a safety system that will reverse the door once it comes in contact with an object. This feature can save you your properties or your family’s lives. This is an essential feature that should always be working. To do this, open the garage door and place a board on the floor that’s centered under the door. Close the garage door through your remote or wall switch and it should reverse back once it makes contact with the object. You then have to make adjustments if the door didn’t travel far enough. Do this test at least once a month.

In maintaining your garage door, make sure that you do not attempt to tighten or loosen any bolts as this should be left to the professionals. If you encounter any problems or issues with your garage door opener’s safety system, then you should contact a professional to help.

In addition to that, it is important to never let your kids play under the garage door. Remotes and switches should be kept out of a child’s reach in order to prevent any unwanted incidents.

The post Garage Door Openers appeared first on A Click Away Remotes.

source http://blog.aclickawayremotes.com/garage-dooropeners